How To Do Anything - Learn with us

How to Drive a Car

Learning how to drive is a lot easier than it looks. It looks intimidating from the passenger's seat, or in the movies, but once you get behind the wheel and gently put your foot on the pedal, the process becomes very intuitive. If you're a defensive driver and learn to take things slow in the beginning, you'll be well on your way to mastering the basics. This article assumes you'll be driving an automatic transmission vehicle. If you're not driving an automatic, click here to learn the basics of driving stick-shift (manual transmission), although the general process will still be the same

Step 1:
Adjust the seat so that your feet comfortably reach both pedals. You can adjust your seat forward and backward, as well as up and down. Some cars will have electronic controls (usually on the left side of the seat), while older cars will usually have a latch underneath the seat that let's you control the position of the seat. But you can tell the difference

Step 2:
Familiarize yourself with the foot pedals. In an automatic car, the two foot pedals control acceleration and braking, respectively. The rightmost pedal (which is usually smaller than the other pedal) is the acceleration pedal, and pressing down on it speeds the car up. The pedal to the left (which is usually larger than the acceleration pedal) is the brake pedal, and pressing down on it slows the car down.
Even if you are left-foot dominant, use your right foot to reach both pedals. It will feel weird at first if you're left-footed, but getting used to it is important because it's proper technique and ultimately safer.
Never use both feet at once to reach the pedals. Only use one foot — your right foot — to access each pedal. This will make it impossible to accidentally press down on both pedals at the same time.

Step 3:
Adjust your car's mirrors so that you can see through them clearly and effectively. Your car should have three mirrors: one rear view mirror, which allows you to see directly behind the rear windshield in back of you, and two outside mirror which let you see to either side of the car and protect you from blind spots.[1]
Your rear view mirror should be positioned so that when you're in your normal driving position, you can see directly behind you and as much of the rear windshield as possible.
The Society of Automotive Engineers has one recommendation for how to position your outside mirrors in order to eliminate blind spots. It recommends positioning the mirrors further outward than normal, so that they just overlap with the viewing angle of the rear view mirror.[2] Although disorienting at first, this positioning actually clues the driver in to cars in her blind spots which she might otherwise only be able to spot by looking over her shoulder.

Step 4:
Know where the parking brake, also called a hand or emergency brake, is and what it does. The parking brake is a longer lever with a button on its very tip. When the parking brake is pulled up, it helps locks the car in place, ensuring that it doesn't move. When the brake is let down, it is disengaged and the car can freely move. Make sure that your parking brake is disengaged before you start driving.

Step 5:
Get a feel for the shift lever. The shift lever is usually positioned in between the two front seats of a car, and it controls some of the car's gears (park, neutral, drive, reverse). Sometimes, the shift lever is on the right side of the steering wheel.
If your shift lever is engaged in Park and you turn your car on, your car won't move forward no matter how much you press down on the acceleration.
If your shift lever is in Neutral, your car's natural momentum will continue to carry it forward.
If your shift lever is in Reverse, your car will move backwards instead of moving forwards when you take your foot off the brake.
If your shift lever is in Drive, your car will move forwards when you take your foot off the brake.

Understand your basic dashboard controls. These gauges help show the driver how much gas the car is carrying, how fast the car is going, how hot the engine is, and how many RPM (revolutions per minute) the engine is clocking.
The speedometer is probably the most important dashboard control in the car. It tells you how fast your car is traveling, in either miles per hour (MPH) or kilometers per hour (KPH).
The RPM gauge tells you how hard your engine is working. Most RPM gauges will have red areas starting at 6,000 or 7,000 RPM. When the dial in the gauge, travels into the red, learn to ease off the acceleration.
The gas gauge tells you how much fuel your car has. It usually has a dial that travels between "F" and "E," with "E" signaling "empty" and "F" signaling "full."
The temperature gauge in the car tells you whether your car's engine is overheating. It usually has a dial that travels between "H" and "C," signaling "hot" and "cold." Your dial should normally be in the center of the gauge.


Portable Document Format basically known as PDF is a very convenient and easily accessible open standard file format. It was introduced in the early 1990s by Adobe. It is the best way to share documents, including text formatting and inline images independent of application software, hardware, and operating systems. PDFs are immensely popular when it comes on sharing either personal or professional documents.

Same is the case with Word documents. Word documents come with a file extension of .doc or docx and is widely used for almost every purpose whether it is about the office or any other personal use. Even though both the file format are important in their own place. But there is not any compatibility in both of them.

The major disadvantage which can be experienced with pdfs is, they are not editable. If at any point of time you want to edit the pdf, either you have to drop the idea of doing so, or you have to look for third-party software.

In this guide, I’ll show you the easiest method to convert pdf to word document without software. Yes, you can convert your pdf file into a word document using google drive. Once the pdf is converted into .DOC extensions, you can edit them anytime. Either it is about text or images, pdf would be fully into your control just like a word documents. Converting file extension using google drive is one of the easiest ways down which easy and hassle free. No much time required, just a few clicks and you are done.

To convert pdf to word document without software, all we need is a google account so that we can access google drive. Once we have that, we are all ready to get our pdf converted. Let’s head to the steps.

Step 1. First of all, you need to open google drive enter your google account credentials and click on sign in.

Step 2. Once you are on the google drive homepage, you can see a big red button on the left of the page written NEW over it, just click on it. A list of the drop-down menu will open up. See the screenshot to understand it better.

Step 3. In the options provided, click on File upload. Have a look on the screenshot.

Step 4. Now in the open window, navigate through the PDF you want to convert into the word document and click on Open.

Step 5. Once the PDF file is uploaded, select it(single click on it to select) and click on the three dots i.e. more actions button in the top of the page, you will see another set of options.

Step 6. Now in these set of options, click Open with and then Google docs. The moment you do this, your pdf file will get opened in google docs. Now you can do desired changes in the pdf and edit its fonts, change images etc.

Step 7. Once you are done, click on the file menu, placed on the top left and click on Download as..> Microsoft Word(.docx). Navigate through the location where you would like to save your file and click on Save.

That’s it. Your pdf file has been successfully converted into word documents. This way you can convert your file not only in word document but also in Open document format(.odt), Rich text format(.rtf), Plain text(.txt) etc.

Isn’t the method very simple to convert a pdf file into word documents?? That too without using any third party software. Though, there are a number of ways through which we can convert file extension from pdf to word document, but for them we have to take help of either any third party software or they are not that easy ways. Apparently, Google drive seems to be the best method to Convert pdf To Word Document.

How to Load different header.php files on different pages?

You could make an if, something like this
<?php if( is_page(19) ) {
echo get_template_part( 'header', 'custom' );}
else {
echo get_header(); } ?>
That way, if the page id is 19 it'll post the templatefile header-custom.php instead of the usual header. You could substitute is_page()
with e.g.
is_page(array(1, 2, 3, 4, ))
And it loads what ever you write, like ding-dong.php would be echo get_template_part( 'ding', 'dong' );}.
You can also make elseif's to have different conditions, if you have multiple headers.
Havnt tested it out so i dont know if it's working, but it should.
Though, if u only make small changes and know which pages the change should be active, you're easier of by just doing this:

How to become pilot after 12th science and which college should I join.

A Commercial Pilot License (CPL) is a qualification that allows you to act as a Pilot in Command or PIC of a single pilot aircraft or as co-pilot of a multi-pilot aircraft.

The basic requirements to obtain the CPL license are published by the International Civil Aviation Organization (ICAO). However, the actual courses in flight training programs vary from country to country, based on the National Aviation Authorities (NAA).

The educational qualification is 10+2 or equivalent with 55% marks in Physics and math’s individually for General Category candidates and 50% marks individually in Physics and Maths for SC/ST/OBC candidates. All candidates must have passed English at 10+2 level as one of the subjects. Candidates should appear for Written Entrance Examination and Pilot Aptitude Test, followed by the final selection by an interview board comprising of representatives from industry bigwigs like NACIL, DGCA, Psychologist and IGRUA examiners.

Although candidates with less than 17 years may be permitted to undergo selection process but they must not be less than 17 years before joining the course.

Many of institute offer courses in Aviation for Commercial Pilot Training such as Commercial Pilot License (Certificate IV in Aviation), Diploma in Aviation, B.Sc. in Aviation, etc.
For More info read this Article:

priority in Google Sitemaps

The priority of this URL relative to other URLs on your site. Valid values range from 0.0 to 1.0. This value has no effect on your pages compared to pages on other sites, and only lets the search engines know which of your pages you deem most important so they can order the crawl of your pages in the way you would most like.

The default priority of a page is 0.5.

Please note that the priority you assign to a page has no influence on the position of your URLs in a search engine's result pages. Search engines use this information when selecting between URLs on the same site, so you can use this tag to increase the likelihood that your more important pages are present in a search index.

Also, please note that assigning a high priority to all of the URLs on your site will not help you. Since the priority is relative, it is only used to select between URLs on your site; the priority of your pages will not be compared to the priority of pages on other sites.

However, as far as I can tell with my tests, "priority" isn't used at the moment at all. I haven't been able to get a clear answer out of Google on this, it's more of a "if you can provide unique insight, then do it", but "don't do anything sneaky or we will ignore it". My tests have not shown an influence (but it's hard to say what will happen in the future - they're moving very fast!).

Keep in mind that if you do decide to use priority, it should be set with values which are not already a part of Googles algorithm -- values defined by yourself and not by an automation. By using PR or crawl-level you are not giving Google a unique insight into your site - it's something which it knows already. It also makes little sense to set a high priority to deep nodes (or the root) across the band. If you can however say "THIS is a page that is more important than the others but you won't notice that" then use a higher priority for that. Rotating a high priority through your site is likely to be recognized (and perhaps even penalized).

However, since it has not been confirmed (neither by my tests nor by Google itself), I would just ignore the priority setting and keep it out of your Google Sitemap files.

How can Website Ranking Going Down; Some Probable Reasons And Its Solution

There might be a several reasons behind losing ranking of your website in the major search engines like Google, Bing, Yahoo, etc. Because, there are too many small and big things are working as search engine ranking factor (SERPs) for a particular web content or an entire website. It's really tough to say anything specific about SEO failure of a website, without investigating search data comes from any paid and free search analytics tools like- Google Search Console, Bing Webmaster, etc.

But, here is some common SEO mistakes which have been seen in most of the SEO failure websites. You should definitely take care of these

The top 5 probable reasons and its solution -
1 Contents are outdated: It's the most common issue. An outdated content is act like a less informative or less useful content to its users as well as to the search engines. Hence, search engines have to show up new and updated content in upper position to keep the search results useful.

So, you need to update your contents regularly with latest and most relevant information that you can stay in the competition. Here some matters which we generally forget to update-
  • Hyperlinks or outbound links.
  • Change of Company/Organization names. 
  • Grammatical mistakes.
  • Pictures.
2 Slow loading issue: A slow loading sites doesn't able to provide a better user experience. Because, it's boring to see a slow loading website. Users simply ignore slow loading sites and move to the other place. Now, as today's search engines are designed based on user satisfaction so, a slow loading site will lose its ranking very fast.

You can test your site loading speed using Google PageSpeed Insights. Here some common reasons behind slow loading site-
  • Using heavy java scripts.
  • Using excess CSS codes.
  • Un-optimized images.
  • Slow server response.
3 Increase of irrelevant contents: "Right things should be in the right place"- search engines are following this rule strictly! So, you have to make all of your content relevant to your site topic to make your site search engine friendly. For instance- A travel site should contain travel related content, not fashion related contents.

Creating more irrelevant contents will reduce your overall site relevancy to the search engines as well as to the human users. If your website has too many irrelevant contents, then move them to a new place now!
4 Backlink competition: "Dofollow" quality backlinks affect your site's page rank (Google page rank) and a higher page rank will boost search engine ranking of your entire website. So, if your site ranking is going down, then there might be two reasons-
  1. Your website is losing some quality backlinks. It'll happen when site moderators remove your website links from their contents or, if you redirect your website to a new domain name.
  2. Your competitors has generated more quality "dofollow" backlinks than you.
The only solution of this problem is- generating quality backlinks by creating useful contents or providing quality service that people like to link back your site naturally.

5 Crawling issue: If search engines are unable to crawl your site properly, then a negative effect will appear in your site's SEO performance very soon. Crawling is an indexing process by which search engines index your website/contents of their database. Although it's a very complicated process, but, it's quite easy to understand that- we should let search engines to crawl your site properly to get a perfect SEO.

So, you should be careful while using a robots.txt file because, a wrong robots.txt file will block search engines to crawl your website. So, create a perfect robots.txt file which can guide search engine crawlers properly.

How too use Chitika and AdSense Together

Some Important Tips for Using Chitika and Adsense Together;

Yes! you can use both Google Adsense and Chitika together to monetize your blog or website perfectly! Although, Google Adsense is the best and there is actually no need for implementing any other advertising network on your website. Still then, if you think that your web site has some extra space for another ad network, then you can definitely implement Chitika for that.

Chitika is a search targeted advertising network and Google Adsense is a contextual advertising network. So, you can use Chitika along with Adsense. It will not violate the Adsense TOS.

Google Adsense Ad placement policy
adsense with other ads

Tips to use Chitika and AdSense Together;

  1. Place Chitika ads in a separate place on your website. Always maintain a distance between Adsense and Chitika ads.
  2. Use different color and size for Chitika ads.
  3. Don't use Chitika mobile ads while you're using Adsense at the same place. Because, Google recently launched Mobile Anchor Ads which also display on the bottom of the mobile devices where your Chitika mobile ads will be displayed. 
  4. If you're using three Adsense banner then use only one Chitika banner in a single page.
  5. No need to use Chitika apps like- Linx, Hover and Highlight.
Last but not in the list- Read the Google Ad placement policies very carefully after using other ads and Google ads at the same place.